11003054

Grain Marketing Board wants fabrication steel at Aspindale depot — 26 lengths of angle iron, 12 round tubes, channel iron, plate, sheets, flat bar, 25kg welding rods and M16 studs; bids close 25 August, 11am.

Thirteen lines of fabrication materials for the GMB Aspindale depot, delivered within 7 days. The sections, all 6-metre lengths: 4x angle iron 80x80x5mm, 8x 60x60x5mm, 8x 50x50x5mm, 6x 40x40x5mm, 4x channel iron 100x50x5mm, 10x flat bar 50x5mm and 12x mild steel round tube 25mm diameter. The plate: one mild steel plate 10mm x 1200 x 2400mm and 3 mild steel sheets 3mm x 1200 x 2400mm. The consumables and fixings: 25kg of 3.15mm welding rods, 20 cutting discs, 10 M16 studs at 1000mm and 32 M16 nuts. The full tender document was not available to us — only the notice fields above were published where we can read them. Download it from the eGP portal before quoting.

Low effort to bid.

Written from the published notice — the full tender document was not available to us. Download it from the source before bidding: eligibility rules, fees and specifications may only appear there.

• The flat bar line reads '50 x 5m x 6m', which is almost certainly 50 x 5mm in 6m lengths.
• No steel grade is specified on any section.
• The cutting disc line gives no diameter.
• This is a full fabrication kit delivered in 7 days; confirm stock across all thirteen lines before quoting.

• SteelAngle Iron 80 x 80 x 5mm x 6m4 Each
• SteelAngle Iron 80 x 80 x 5mm x 6m4 Each
• SteelAngle Iron 60 x 60 x 5mm x 6m8 Each
• SteelAngle Iron 60 x 60 x 5mm x 6m8 Each
• SteelAngle Iron 50 x 50 x 5mm x 6m8 Each
• SteelAngle Iron 50 x 50 x 5mm x 6m8 Each
• SteelAngle Iron 40 x 40 x 5mm x 6m6 Each
• SteelAngle Iron 40 x 40 x 5mm x 6m6 Each
• SteelMild Steel Round Tube diameter 25mm x 6m12 Each
• SteelMild Steel Round Tube diameter 25mm x 6m12 Each
• SteelMild Steel Plate 10mm x 1200 x 2400mm1 Each
• SteelMild Steel Plate 10mm x 1200 x 2400mm1 Each
• SteelChannel Iron 100 x 50 x 5mm x 6m4 Each
• SteelChannel Iron 100 x 50 x 5mm x 6m4 Each
• SteelMild Steel Sheets 3mm x 1200 x 2400mm3 Each
• SteelMild Steel Sheets 3mm x 1200 x 2400mm3 Each
• SteelFlat Bar 50 x 5m x 6m10 Each
• SteelFlat Bar 50 x 5m x 6m10 Each
• SteelWelding Rods 3.15mm25 kg
• SteelWelding Rods 3.15mm25 kg
• SteelCutting Discs20 Each
• SteelCutting Discs20 Each
• SteelM16 Stud x 1000mm10 Each
• SteelM16 Stud x 1000mm10 Each
• SteelM16 Nuts32 Each
• SteelM16 Nuts32 Each

• 20 Aug 2026, 16:30 — Published by GRAIN MARKETING BOARD